Mercedes SLK World banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!
Status
Not open for further replies.
1 - 9 of 9 Posts

·
*Registered
2010 SLK300
Joined
·
628 Posts
Discussion Starter · #1 ·
Currently using an Accugauge dial gauge, but not happy with it. which brand/type do you use.

I have trouble getting the gauge on the tire valve properly. didn't have this problem with my old gauge that was many years old, which I bought from Dick Cepek
 

·
Registered 2006 SLK280
Joined
·
1,274 Posts
Mine is ancient but still works well despite the rubber protective surround having disintegrated with time. It's a 0-60psi analog gauge that reads in one psi increments from Longacre Racing Products (Longacre Racing Products). They have lots of them to choose from--digital, analog, various pressure gradients, various increments of reading down to 1/4 psi. Metric gauges, too.
 

·
*DAS/STAR Premium Member
2005 SLK55 AMG
Joined
·
4,038 Posts
I use a 6 inch screw-on truck valve extension for the same reason when putting air into the tyres - the TPMS valves on mine cause SOME of the garage airlines to not seat properly ...

Oh - and I use the onboard pressure readouts ....
 
  • Like
Reactions: bobl
1 - 9 of 9 Posts
Status
Not open for further replies.
Top