Hi
Good day
I have been searching for a
Wind Blocker for quite a while but all are quite pricey.
So I decided to make one.
First I search for a shop that has a laser cutting machine.
I found that a friend of mine has one.
After some discussion, he said no problem as long as I give him a template.
Finally after many templates, I finally got it done today but it is still not wired permanently just temporary.
Beside I still have not decided on the logo.
It will have two color light
white = on all times
amber = on when brake applied
on/off switch when not using
Anyway the attached pictures should explain.
The total cost for 10 mm acrylic is
about less than USD80.00:grin::grin::grin:
Thank you & have a nice day.
Good day
I have been searching for a
Wind Blocker for quite a while but all are quite pricey.
So I decided to make one.
First I search for a shop that has a laser cutting machine.
I found that a friend of mine has one.
After some discussion, he said no problem as long as I give him a template.
Finally after many templates, I finally got it done today but it is still not wired permanently just temporary.
Beside I still have not decided on the logo.
It will have two color light
white = on all times
amber = on when brake applied
on/off switch when not using
Anyway the attached pictures should explain.
The total cost for 10 mm acrylic is
about less than USD80.00:grin::grin::grin:
Thank you & have a nice day.
Attachments
-
17.8 KB Views: 177
-
23 KB Views: 142
-
41.4 KB Views: 143
-
38 KB Views: 171
-
43.9 KB Views: 150
-
59.4 KB Views: 159
-
60.4 KB Views: 167
-
29.7 KB Views: 143