Mercedes SLK World banner
  • Hey Everyone! Enter your ride HERE to be a part of this months Ride of the Month Challenge!

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
Hi all,

Went out last night, parked car looked around it to make sure all was good. Found the passengers side front headlight washer cover was laying there on the ground.

Anyone know how it goes back in please?

Thanks
 

·
Administrator Founding Member since 2006
Joined
·
106,116 Posts
it just pops in provided the little ridges are still intact. It should have a little 'cord' to make sure it does not escape.
 

·
Premium Member 2004 SLK200K
Joined
·
10,777 Posts
If it's the washer cover , it should be spring loaded and possibly needs to be fitted from the inside with the bumper off .
If it's the tow line bolt cover , as Jeff said ..
 

·
Administrator Founding Member since 2006
Joined
·
106,116 Posts
Craige
I think you got that backwards?
The washer covers just pop in
 

·
Premium Member 2004 SLK200K
Joined
·
10,777 Posts
Any thing's possible , failing memory and all , but I'm pretty sure that on the r171 bumper I removed , the washer cover was clipped in and sprung loaded so that when the washer jet came out it pushed it down and then when retracted it sprung back ..whether or not it can just be clipped back in from the front , I can't say .
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top