Mercedes SLK World banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
This is the cylinder where you need to drill out the dimples then use a punch to push out the cylinder. Been trying to do it still connected to car on a workmate bench next to car. Not having success. Maybe should just send it to TopHydraulics...
 

·
Administrator 2009 SLK 55 AMG/Founding Member 2006
Joined
·
98,187 Posts

·
Administrator 2009 SLK 55 AMG/Founding Member 2006
Joined
·
98,187 Posts

·
Premium Member 2005 SLK55 AMG; 2005 SLK350
Joined
·
5,136 Posts
This is the cylinder where you need to drill out the dimples then use a punch to push out the cylinder. Been trying to do it still connected to car on a workmate bench next to car. Not having success. Maybe should just send it to TopHydraulics...
I tried once and made a total hash of it. Next one I sent to tophydraulics. I might try again some day but these are by far the hardest to rebuild yourself.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top