In some markets navigation entry is disabled while vehicle is in motion, here is how to change that.
1. Load HU45 descriptor
2. Check connection speed in ECU properties (Should be 500 as always)
3. Connect to HU
4. Open the Variant Coding Menu
5. Select VCD_Driver_Distraction
6. Change desired options to "Enable"
7. Perform ECU-Coding
1. Load HU45 descriptor
2. Check connection speed in ECU properties (Should be 500 as always)
3. Connect to HU
4. Open the Variant Coding Menu
5. Select VCD_Driver_Distraction
6. Change desired options to "Enable"
7. Perform ECU-Coding