Mercedes SLK World banner

1 - 9 of 9 Posts

·
Premium Member
Joined
·
3,248 Posts
Well, I had to try it!
I installed Bilstein shocks and H&R springs with #4 spring pads.
The tire rubs on the inside on the fender liner (but not for long) and at full suspension extension on two of the liner retaining plastic nuts (I ground them down by 1/8”).
On the outside there is interference with the flange between the bumper cover and the rear quarter panel at suspension compression; I massaged it down with a flapper wheel.

 

·
Premium Member
Joined
·
4,913 Posts
How many sets of partially used tires are sitting in your garage at this point? :D Nicely done by the way, although requires too much customization for my taste.
 

·
Founding Member
Joined
·
4,599 Posts
Sweet mod, and I thought my 265's were wide. it's all relative now, I have 325's on my Porsche.
 

·
Registered
Joined
·
108 Posts
285 would be nice :) How wide are your wheels and offset?
I assembled my 30mm lowering sprins today and now going to test drive...have to send some picks also.
 
1 - 9 of 9 Posts
Top