Mercedes SLK World banner
Status
Not open for further replies.

Camshaft adjuster magnet and fastener torques.

1K views 2 replies 2 participants last post by  Rofa 
#1 ·
The area around this was oily, dirty but not really wet. Anyway having looked at EPC and WIS I decided just to remove it and see if there was a gasket behind. There wasn't somewhat to my surprise, but neither was there much oil there. I'm assuming there is a seal somewhere inside the head which prevents oil escaping and pressures in the camshaft cover are not that high anyway. So I intend to just reassemble after cleaning up unless I should be doing something more complex. If anyone has the torque figures for the three fasteners I'd be grateful
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top