 hat hanger without drilling holes
Quote:
Originally Posted by mtiede  Dolebludger,
Thanks for the concern. I gave up on drilling back at post #2 
Haven't quite figured out what to do yet, but I may try the adhesive suggested elsewhere.
I will probably take the picture today since the camera battery is now charged. | Mtiede,
I fashioned a small hook using some left-over flat brass material (as a test) but a black coated coat hanger wire will work as there is enough clearance.
This method uses the vertical storage area between the seats at the rear bulkhead. You can have one for each side if so desired. Bend and fashion a coat hanger wire to follow the contours of the lid of the vertical sorage compartment and then a small hook at the outside part. The closed lid will keep the hook in place, and you should be able to hang a hat on it. Hope the above helps. See pix below:  
__________________
Eddy
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Pewter/Beige, PIII package, Airscarf, Hands-Free Communication System, Lighting package
Designo Black Leather Cover on e-brake handle, (
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Bill T), SmartTop v1.0, Kleyman 3BFM (NoRegret Custom), Green Air Filters, Mod. R170 ant., EuroClear sidemarkers w/PIAA PlasmaIon lamps, chromed front & rear turn indicator lamps, PIAA SuperPlasmaGTX front parking lamps, bilateral rear fog lamps enabled. |