Sorry took so long to post the picture..
here's the picture of a computer fan connector. I used dremel tool to cut off the excess to fit into the socket. As for the pin, I used a couple of old resistor lead (they are pretty stiff) and soldered to a piece of wire.
[IMG]file:///C:/DOCUME%7E1/TS/LOCALS%7E1/Temp/moz-screenshot-16.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/TS/LOCALS%7E1/Temp/moz-screenshot-17.jpg[/IMG] [IMG]file:///C:/DOCUME%7E1/TS/LOCALS%7E1/Temp/moz-screenshot-15.jpg[/IMG] |