Originally Posted by DansSlk

Hi,

As you know both the AMG's and the Brembo's are one and the same but if you go for AMG's your probably going to be able to keep your warranty since the parts come via Mercedes Benz not direct from supplier and have certain MB numbers stamped in showing they are OEM, just a little something to think about and you could paint the AMG's whatever colour you want and that would not make any difference to it.

Going on the PN#'s that you posted up you are looking at the standard 55 brakes no 030/P98 packs so the part numbers you have posted up are correct for the disk and pad's and they come in two's along with the disks.

For the calipers its looks like your going to need -

Rear -

Caliper
Parts Set Left - A0034202983

Caliper
Parts Set Right - A0034203083

Retaining Spring
Caliper - A0004218791 (X2 unless its automatically done)

TS Bolt Parts Kit
Caliper - A0004202882 (Same as above)

Bleeder Valve
Caliper - A0004213765 (Same as above)

Dust Cap
Bleeder Valve - A0004211748 (Same as above)

Screw
Caliper to wheel bearing - N000000000265 (X4 unless the parts site does it for you, also may be able to use your current screws for this but not 100% sure)

Front -

Caliper
Parts Set Left - A0034204783

Caliper
Parts Set Right - A0034204883

Screw
Caliper to axle - A1244210571 (Same as the rear caliper screw info)

TS Bolt Parts Kit
Caliper - A0004213674 (Same as rear caliper info)

Spring
Caliper - A0004219291 (X2 Unless done automatically)

Pull Rod
Caliper - A2214210014 (Same as above)

Screw
Pull Rod - A0169900601 (Same as above)

Bleeder Valve
Caliper - A0004209155 (X4 Unless automatic)

Dust Cap
Bleeder Valve - A0004211748 (Same as above)

OK mate thats the full kit for 55 brakes whats already on the 350 thats compatible i don't know without actually having the parts on my desk to compare so i thought if i give you the whole list for the system then there's not going to be anything that will jump out at the last minute.

Hope this helps.

Dan