1 : Rear center section paneling
2 : Spare wheel recess cover
3 and 4 : Expanding clip
5 : Rubber stop
6 : Bolts
7 : Electrical connectors
8 : Side trunk paneling
Operation :
a) Open trunk lid
b) Remove spare wheel recess cover (2) from trunk
c) Remove expanding clip (3)
d) Remove expanding clip (4)
e) Remove rubber stops (5)
f) Open bolt covers with suitable screwdriver and undscrew bolts (6)
g) Loosen rear center section paneling (12) from left abd right side trunk paneling (8) whith mounting wedge (9)
h) Unclip left trunk lamp from rear center section paneling (1) toward front and guide through opening in rear center section paneling (1)
i) Unclip trunk partition closed limit switch from rear center section paneling
j) Remove rear center section paneling from rear center section
k) Install in the reverse order