well I don't know if it is availiable on line but i can give you some info if you like,
If you upgrade the engine pulley with one 22,5 mm you will go up to 0.8 bar. But if you do this, you have to modify the ecu (to have enough fuel at all rpm so you won't brake the engine.) These engines are capable of 0.8-0.9 bar without serious mods and problems.
so The best is:
22.5 mm pulley
ecu upgrade
bigger intercooler (add safety!!)
Then consider that you will go approx 245-255 hp
Note that before the ecu re-programming and with a smaller pulley 0.6 bar i was at the dynometer 207 rwp and 230hp without any problems... tested for 80.000km + . |